6 Common Symptoms of High Water Pressure in House

You might have heard of the classic life saying of “everything in moderation.” When it comes to water pressure within your home, the middle ground is the most desirable. If it becomes too low, your home appliances won’t operate at the rate they are supposed to. The same can also be said of water pressure being extremely high.

There are many symptoms of high water pressure noticeable within your residence. If you leave these symptoms to fester, your home can seriously be negatively impacted. Before contacting your local plumber for help, you should get familiar with these six common symptoms of high water pressure buildup in your house:

1. Leaking

No one likes a leakage, which is a common symptom of the high water pressure in your house. Whenever one is discovered, you usually have to go out of your way to diagnose the issue. The source, however, could be traced back to high water pressure.

In a general sense, leakages can be caused by the water pressure being high at an atypical rate. A good example of this can be found through the discovery of a constant drip in one of your appliances. Some of these can be diagnosed and fixed with some do-it-yourself labor. If the problem persists, however, a plumber would have to rectify the issue.

2. Water Spitting

You’ve probably encountered these symptoms of high water pressure at least once in your home. You pull on a faucet, either forcibly or gently, and water shoots out in a high burst. This is a telltale symptom of the water pressure in your home being extremely high. Usually, the pressure has accelerated to a higher point because of an arbitrary change occurring at some point.

If air is trapped within your plumbing, this could influence the water shooting out of your faucet at an irregular rate. To fix this nuisance of an issue, locate the fixture closest to your main water supply. The valve or lever should always be open in order to allow water to properly escape and subsequently flow.

3. Banging Pipes

Just hearing the sound of pipes somewhere in your home clanging against one another can be rather disconcerting. If this persists, it may be due to the water pressure being extremely high. Due to the water pressure being exceedingly high, the pipes in your home will create a loud audible noise. This is because they are having difficulty remaining stable due to the elevated pressure.

To fix this, turn off your water valve before flushing the lines. You’ll also want to make sure that your faucets are open and ensure that you flush your toilets a couple of times. Once the lines are clear, you may turn your valve back on and find that your pipes are in working order.

4. Check Your Appliances

It isn’t uncommon to find your home appliances becoming faultier sooner rather than later. This may be due in large part to high water pressure negatively impacting their lifespan.

If your water heater or washing machine requires replacement before their intended lifespan ends, be on the lookout for the obvious culprits. The symptoms of leaking over a prolonged period of time will wear and tear the apparatus. To diagnose the problem, try to check the status of your water valve as soon as possible to minimize the potential damage.

5. Irregular Toilet Cycle

Toilets within the home may eventually find themselves operating beyond usage. If this occurs, a higher than normal water pressure would be the prime factor. If a toilet in your home is found to be running all the time, there may other secondary factors that are influencing the water pressure being higher than average.

Conduct a thorough search yourself first by checking if the tank float is not adjusted. The flush valve becoming stuck may also contribute to leaking, all of which may be the result of high water pressure. Should you find trouble adjusting the physical functions of the toilet confusing, it would be best to contact a local plumber for assistance.

6. Shower Force Is Painful

The last thing you want to worry about when climbing into your shower is having it exert an extreme amount of force when opened. Water flowing at a rate that rapid can be annoying at best and slightly painful at worst. High water pressure is the main reason why this is occurring.

However, a simple fix may be available. It just resides within the shower head. Unscrew your shower head and search for a washer that may be misaligned. You can also try turn off the water valve first and then proceed to adjust it until you have a desirable flow and pressure.

If symptoms are present, then you’ll want to act on reducing your water pressure as fast as possible. Thankfully, most cases can be resolved with a little bit of handiwork. For larger repair jobs, you’ll want to contact a professional service to ensure that all related apparatus’ are in normal, working order.

You Might Also Like